Hardware and Parts

window and sliding door replacement parts in stock or available! We ship fast via usps!

How do you put a sliding door back on track?

Sliding doors are a great way to add style and convenience to any home. However, they can be a hassle to maintain, especially when it comes to putting them back on track. Fortunately, this is a relatively simple task that can be done in a few steps.

The first step is to inspect the door and make sure there are no broken parts. If any parts are broken, they should be replaced before attempting to put the door back on track. Be sure to use the same type of hardware that was used when the door was originally installed.

Once the door is inspected and all parts are in good condition, the next step is to lift the door off the track. This can be done by lifting the door up from the bottom and then pulling it out of the track. Be sure to support the door with both hands as you lift it.

After the door is off the track, the next step is to clean the track. This can be done with a vacuum cleaner or a damp cloth. Be sure to remove any dirt or debris that may be obstructing the track. If there is any rust on the track, use a wire brush to remove it.

Once the track is clean, the door can be put back on. Start by sliding the door onto the track and then pushing it back until it is in the desired position. If the door is not sliding smoothly, use a lubricant such as WD-40 or silicone spray to lubricate the track.

Once the door is in place, the next step is to secure it. This can be done by using screws or nails to attach the door to the track. Be sure to use the same type of hardware that was used when the door was originally installed.

Finally, the door should be tested to make sure it is functioning properly. Open and close the door a few times to make sure it is sliding smoothly and without any obstructions.

Putting a sliding door back on track is a relatively simple task that can be done in a few steps. Be sure to inspect the door and track before attempting to put the door back on, and use the same type of hardware that was used when the door was originally installed. With a little bit of effort, you can have your sliding door back on track in no time.

Leave a Comment