Hardware and Parts

window and sliding door replacement parts in stock or available! We ship fast via usps!

How do you replace a tilt window channel balance?

Replacing a tilt window channel balance is a relatively simple task that any homeowner can do in a few steps. This type of window balance is a system of springs, cables, and pulleys that work together to counterbalance the weight of the window and keep it in the open position. Over time, the springs can wear out, leading to a window that won’t stay open. Replacing the balance is the only way to restore the window’s functionality.

Before beginning, make sure you have the right replacement balance for your window. Different window types and sizes require different balances, so it’s important to get the correct one. You can usually find the correct balance size and type printed on the plastic cover of the existing balance. Once you have the right balance, you’re ready to get started.

The first step is to remove the existing balance. Start by removing the plastic cover from the balance. This will reveal the springs, cables, and pulleys that make up the balance system. Carefully remove the springs and set them aside. Then, use a pair of pliers to remove the pulleys from the balance.

Next, you’ll need to remove the balance from the window frame. To do this, use a pair of pliers to loosen the screws that hold the balance in place. Once the screws are loose, you can carefully remove the balance from the window frame.

Now it’s time to install the new balance. Start by attaching the springs to the new balance. Make sure the springs are securely attached and that they are evenly spaced. Then, attach the pulleys to the balance. Make sure they are secure and that they are aligned properly.

Finally, attach the new balance to the window frame. Use the same screws that you used to remove the old balance. Make sure the screws are tight so that the balance is secure. Once the balance is in place, you can replace the plastic cover.

Your tilt window channel balance is now replaced and your window should be back to normal. If the window still won’t stay open, you may need to adjust the tension of the springs. This can be done by adjusting the screws that hold the springs in place.

Replacing a tilt window channel balance is a fairly simple task that any homeowner can do. Before beginning, make sure you have the right replacement balance for your window. Then, carefully remove the old balance and replace it with the new one. Make sure the screws are tight and the springs are evenly spaced. Once the new balance is in place, replace the plastic cover and your window should be back to normal.

Leave a Comment