Installing a thumbturn is a great way to add security and convenience to your home or office. A thumbturn is a door lock that requires a key to open from the outside, but can be opened from the inside simply by turning the knob. It’s a great way to add an extra layer of security to your home or office while still allowing you to easily open the door from the inside.
The installation process for a thumbturn is relatively straightforward, but it can be a bit tricky if you’re not familiar with the process. Here’s a step-by-step guide to help you install your thumbturn:
1. Start by preparing the door. Make sure the door is properly aligned and that the hinges are properly secured. If there are any gaps around the door frame, fill them with weatherstripping or caulk to ensure a snug fit.
2. Next, you’ll need to remove the existing door knob. This can usually be done by unscrewing the screws on the interior side of the door knob. Once the screws are removed, the door knob should come off easily.
3. Now it’s time to install the thumbturn. Start by attaching the base plate of the thumbturn to the door. Make sure the base plate is securely attached, as this will help ensure the thumbturn is properly aligned and works correctly.
4. Once the base plate is attached, you can now install the thumbturn itself. Line up the thumbturn with the base plate, then use the screws that came with the thumbturn to secure it in place.
5. Now it’s time to install the latch. Start by attaching the latch plate to the door frame. Make sure the latch plate is aligned correctly and securely attached.
6. Once the latch plate is in place, you can now install the latch itself. Line up the latch with the latch plate, then use the screws that came with the thumbturn to secure it in place.
7. Finally, you can now install the strike plate. This is the metal plate that the latch will hit when the door is closed. Line up the strike plate with the latch, then use the screws that came with the thumbturn to secure it in place.
That’s it! You’ve now successfully installed your thumbturn. To test it out, try locking and unlocking the door with the key, then open the door from the inside by turning the thumbturn. If everything works properly, you’re all set.
Installing a thumbturn is a great way to add extra security and convenience to your home or office. With just a few simple steps, you can easily install your own thumbturn and enjoy the added layer of security and convenience it provides.