Window balances are a type of window hardware that help to support the weight of a window sash, allowing it to open and close easily. A spiral window balance is one type of window balance, and it is designed to be adjustable, so that it can be tightened if the window becomes too loose. Tightening a spiral window balance is a relatively simple process that can be done with a few basic tools.
Step 1: Remove the Balance
The first step in tightening a spiral window balance is to remove it from the window. This can be done by unscrewing the screws that hold the balance in place. Once the screws have been removed, the balance should be able to be pulled out of the window frame.
Step 2: Adjust the Spring Tension
Once the balance has been removed from the window, the next step is to adjust the spring tension. This is done by turning the adjustment screw on the balance. If the window is too loose, the screw should be turned clockwise to increase the tension. If the window is too tight, the screw should be turned counterclockwise to decrease the tension.
Step 3: Reinstall the Balance
Once the desired tension has been achieved, the balance should be reinstalled in the window frame. To do this, the balance should be inserted into the frame and the screws should be tightened to secure it.
Step 4: Test the Window
Once the balance has been reinstalled, the window should be tested to make sure that it is functioning properly. The window should open and close smoothly and the tension should be adjusted as needed.
Tightening a spiral window balance is a relatively simple process that can be done with a few basic tools. It is important to make sure that the tension is adjusted correctly, as too much tension can make the window difficult to open and close. Additionally, it is important to make sure that the balance is securely reinstalled in the window frame. With the right tools and a bit of patience, anyone can successfully tighten a spiral window balance.