Window balances are an important component of any window system. They are responsible for the smooth operation of the window and for ensuring that the window is properly balanced so that it can open and close properly. If your window balance isn’t working properly, it can cause a number of problems, from difficulty opening and closing the window to the window being stuck in an open or closed position. Fortunately, window balances are relatively easy to fix and can be done with a few simple tools.
The first step in fixing a window balance is to identify the problem. If the window is difficult to open or close, then the balance may be the cause. The balance can be located by looking at the bottom of the window frame. It should be a metal or plastic tube that runs the length of the window. If the balance is visibly damaged, then it needs to be replaced.
Once the balance has been identified, the next step is to remove the balance from the window. This can be done by unscrewing the screws that hold it in place. Once the screws are removed, the balance can be carefully pulled out of the window frame.
Once the balance has been removed, the next step is to inspect it for damage. If the balance is damaged, it will need to be replaced. If it is in good condition, then it can be re-installed.
When re-installing the balance, it is important to make sure that it is properly aligned with the window frame. The balance should be centered in the frame, and the screws should be tightened securely.
Once the balance is re-installed, the next step is to adjust the tension. This is done by turning the adjustment screw located at the top of the balance. Turning the screw clockwise will increase the tension, while turning it counterclockwise will decrease the tension.
The final step is to test the window to make sure that the balance is working properly. The window should open and close smoothly, without any sticking or binding. If the window is still not working properly, then the balance may need to be adjusted again.
Fixing a window balance is a relatively simple process that can be done with a few simple tools. It is important to make sure that the balance is properly aligned with the window frame and that the tension is adjusted correctly. Doing so will ensure that the window opens and closes smoothly, without any sticking or binding.